Roof, the integral part of any building structure, must be prepared with great care. Water leakages through the roofs are quite common. The owners of buildings with defective roofs of any type, including the flat roofs, are challenged with great inconvenience during heavy rains. Hiring the services of a prominent flat roofing company is recommended to live or work comfortably. The sincere guys employed by these roofing companies are the people who enable the building owners and the residents to enjoy their lives without any difficulties.
Candidly, the construction of the flat roof is not child’s play. Hundreds of flat roof variations and roof systems are available in the market. Whether you are interested in constructing a residential or a commercial flat roof, services of any rubberbond roofing Surrey would satisfy your specific needs.
Types of flat roofs – Usually, two types of flat roofs, i.e. warm and cold flat roofs, are popular these days. The warm roof construction method involves placing the roof insulation over the timber decking. The cold roof method is related to insulation that is placed between the joists, and ventilation is done above the roof insulation.
Cold roofs are usually equipped with visible ventilation. However, the older buildings may lag behind in this regard as the relevant cold roofs did not enjoy vents. To see if the roof has since been raised higher than the adjoining roofs. Be wise to learn that the roof insulation on warm roofs is on the tops.
Large numbers of building owners prefer warm roof construction. The pieces of roof insulation are cut in skilful manners by spending a lot of time. Cold bridging may happen if the roof insulation is not cut in the correct manner and air penetrates the pieces.
Significant features of flat roofs – Stripping the old covering in the older flat roofs may lead to triggering part L. The need for insulation arises as per the new regulations with regard to the old flat roofing methods. The same is true with the poor insulation that has to be done again as far as triggering part L is concerned. Dealing with the new build project involving flat roofing requires the building to part L of building control.
Insulation – Flat roofs, in general, can be insulated. However, the cost factor must be considered if you are hunting for a flat roofing system in your old buildings. Placing the roof insulation over the roof in respect of flat roofs with bedrooms under them, balcony opening up against the flat roof with the step of the doors out on the roof with a gap of just 50mm above the existing roofs may be a cumbersome task. It would need moving the door and removing the ceiling down below and adding roof insulation & ventilation – damaging the room below.
Repairs – High winds, storm damages or blunt force impacts may need quick repairs. The leakages can damage your belongings and involve serious health issues too. Be wise to engage the local roofing contractors employed by any reliable flat roofing company and go for annual inspections.
Enjoy the flat roofs by maintaining them in careful manners.
